Rubber Gym Flooring: How To Cut & Install It
Whether you're creating a home gym or setting up a professional fitness center, the type of flooring you choose plays a pivotal role. Rubber gym flooring offers durability, cushioning, and noise reduction, making it a popular choice for many. But, how do you cut and install this type of flooring? In this guide, we'll walk you through the basics of how to cut gym flooring and how to install rubber gym flooring.
1. Preparing Your Space:
Before starting, ensure the space is clean, especially if you're considering how to install rubber gym flooring on concrete. Remove any debris or dust from the floor. If you're working on a concrete surface, make sure it's level; if not, you might need to use a self-leveling compound to even things out.
2. Measuring & Cutting Your Gym Flooring:
One of the most common questions is how to cut rubber gym flooring. Here's a step-by-step:
Measure the Space: Measure the length and width of your space to determine how many tiles or rolls of rubber flooring you'll need.
Mark Your Measurements: Using chalk or a white pencil, mark the exact measurements on the backside of the rubber gym flooring.
Cutting the Flooring: Using a sharp utility knife or a pair of heavy-duty scissors, start cutting along the marked lines. Make sure to exert consistent pressure in order to ensure a clean cut. If the rubber is thick, you might need to make multiple passes to cut all the way through.
3. How to Install Gym Flooring Tiles:
If you've opted for tiles instead of rolls, here's how to install gym flooring tiles:
Lay Out the First Tile: Starting from a corner, place the first tile with the interlocking edges facing outward.
Connect the Tiles: Attach the next tile by aligning the interlocking edges and pressing down firmly. Ensure the tiles are snugly fit with no gaps.
Continue the Process: Keep placing the tiles, working your way out from the starting corner. If you need to cut any tiles to fit the room's edges, refer back to the cutting steps above.
However, not all rubber gym flooring tiles have interlocking edges, so if you opt for tiles with flat edges, you can see the tile installation process here.
4. Installing Rolls of Rubber Gym Flooring:
Rolls are usually wider than individual tiles and can cover large areas quickly.
Roll Out the Flooring: Starting from one end of the room, unroll the rubber flooring across the length or width of the space.
Trim Excess: If the roll is too long or wide for the space, trim off the excess using your utility knife.
Secure the Flooring: Especially if you're pondering how to install rubber gym flooring on concrete, it's crucial to secure the rolls in place. Use double-sided tape or adhesive specific to rubber flooring at the edges and every few feet in the center.
5. Finishing Touches:
Once your gym flooring is in place, walk around and inspect for any gaps or edges that might not be secure. If you find any, use adhesive or double-sided tape to fix them in place.
Landmark Athletics is your go-to store for Rubber Gym Flooring
Installing rubber gym flooring doesn't need to be a complex task. With the right tools and this guide in hand, you'll have a safe, durable, and professional-looking gym floor in no time.
Whether you're working with tiles or rolls, understanding how to cut and install gym flooring is a straightforward process that can make a world of difference in the usability and appearance of your fitness space.
For all your rubber gym flooring needs, visit Landmark Athletics online store to browse our selection of products and see how we can help you design and equip the gym of your dreams
